-40%
Upstream Oxygen O2 Sensor 1 for Lexus LS400 4.0L 1995-00/ GS400 98-00 V8 4.0L
$ 10.38
- Description
- Size Guide
Description
Upstream Oxygen O2 Sensor 1 for Lexus LS400 4.0L 1995-00/ GS400 98-00 V8 4.0LPlease check fitment notes & description for accurate information.
Specification:
*Direct Plug-In Replacement.
*4 wire configuration
*Interchange Part Number: 24560
*Length(Sensor to Lead): 300 mm ( 11.81 inch)
*Warranty: 1 Year
*Built and tested to strict quality control standards
Fit Vehicles:
1998-2000 Lexus GS400 V8 4.0L;Upstream
1995-2000 Lexus LS400 V8 4.0L;Upstream
2008-2015 Lexus LS600h V8 5.0L;Downstream Left
1998-2002 Lexus LX470 V8 4.7L;Upstream
2008-2013 Lexus LX570 V8 5.7L;Downstream Right
1996-2000 Lexus SC400 V8 4.0L;Upstream
2010 Toyota 4Runner L4 2.7L;RWD;Downstream
1998-2002 Toyota Land Cruiser V8 4.7L;Upstream
2008-2013 Toyota Land Cruiser V8 5.7L;Downstream Right
2001-2004 Toyota Sequoia V8 4.7L;Upstream
2000-2004 Toyota Tundra V8 4.7L;Upstream
2003-2004 Toyota 4Runner V8 4.7L;Upstream
2010-2012 Toyota 4Runner V6 4.0L; Downstream Right
2010-2012 Toyota FJ Cruiser V6 4.0L;Downstream Right
2003-2004 Toyota Land Cruiser V8 4.7L;Upstream
2005 Toyota Land Cruiser V8 4.7L;To 05/05;Upstream
Package Includes:
1 x Oxygen Sensor
Must Know Before Buying:
The following information is for instructional and guidance reference only. We try and make them as accurate as we can.
If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks.
Items that have been installed, altered or contaminated are non-returnable. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.
20
% restocking fee is required
if buyer bought wrong items due to not paying attention to fitment information and ask for return.
The Price, Quality & Funcitonality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
Q: How do I know the O2 sensor is good or not?
(
Online Video
)
A:
The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method,
DO NOT
pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Please take a
video clip
of the voltmeter and contact us if our sensor:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensor fails to work, in this case.
Note before ordering:
Please check actual stock part size before purchasing replacements. Compatibility list on eBay listing is not a complete list and it is a known issue that there are errors on it;
If possible please try to use laptop to check the compatibility chart, the detail information will be showed in compatibility chart due to mobile phone or tablet PC can not show the detail note about vehicles.
If you encounter model/functional compatibility issue, please contact us for assistance. We will help you exchange to compatible item (if available).
Policy
Shipping
Orders before 1pm will be shipped out the same day, the remains will be processed within 24 hours.
By requersting to change address, customer has to cover all the costs.
Delivery times may vary, particularly during the holiday season.Oftentimes, it costs 1 to 5 business days to get delivered.
Return Policy
We accept return in 30 days and appreciate communication in advance!
You must contact us to request a Return Authorization Number (RA#) before you send anything back. Any packages returned by buyer Without communication will not be handled. With RA#, we may address return issues with high efficiency. Without RA#, we may fail to find your transaction. Appreciate your understanding!
All returned items should be in the original packaging and you need to provide us with the shipping tracking number, specific reason for the return, and your eBay ID.
Replacements or refund should be concluded before return.
Warranty
There is 1 year warranty, if you have any issue with the item, please contact us to address it.