-40%

Oxygen Sensor for 2011-2013 Hyundai Sonata Kia Optima 2.0L 2.4L OEM 392102G550

$ 9.51

Availability: 105 in stock
  • Warranty: 3 Year
  • Fits Vehicle: Fit 11-13 Kia Optima 2.4L Exc Calif
  • Condition: New
  • Type: Oxygen Sensor
  • Country/Region of Manufacture: China
  • Return shipping will be paid by: Buyer
  • Item name: Oxygen Sensor (Not Air Fuel Ratio Sensor)
  • Location: Downstream, Rear, Post CAT, Sensor 2
  • Brand: Reach
  • Restocking Fee: No
  • Manufacturer Part Number: RC0603126
  • Item must be returned within: 30 Days
  • Fitment Type: Direct Replacement
  • Number of Pieces: 1
  • Placement on Vehicle: Rear
  • Cross Reference Part Number: 392102G550
  • Returns Accepted: Returns Accepted

    Description

    Store Categories
    Store Categories
    Oxygen Sensor
    Switches & Controls
    Radiators
    Ignition coils
    Mass Air Flow Sensor Meter
    Fuel Injectors
    Antennas
    Variable Valve Timing
    Lighting & Lamps
    Interior
    Exterior decoration
    Other
    Oxygen Sensor for 2011-2013 Hyundai Sonata Kia Optima 2.0L 2.4L OEM 392102G550
    Product Description
    Package Include:
    1 x Oxygen Sensor as pictured
    Warranty: 3 YEAR
    Interchange For Part Number:
    39210-2G550, 392102G550, 39210 2G550
    Fit Vehicle:
    (Please refer to the compatibility table for details).
    11 - 11
    HYUNDAI
    SONATA TURBO 2.0L DOHC L4 16V, ENG.CODE "THETA II G4KD"- "Rear"
    11 - 13
    HYUNDAI
    SONATA 2.4L DOHC L4 16V, ENG.CODE "THETA II G4KC"- "Rear"
    11 - 13
    KIA
    OPTIMA TURBO 2.0L DOHC L4 16V, ENG.CODE "THETA II"- "Korea Built; Rear"
    11 - 13
    KIA
    OPTIMA 2.4L DOHC L4 16V, ENG.CODE "THETA II G4KC"- "Korea Built; Federal"
    Features:
    Brand New Oxygen Sensor
    Quality Guaranteed Tested to Meet OE Specifications
    Direct OE Replacemen
    t
    Better Fuel Economy
    Decreased Emissions
    Placement on Vehicle: Upstream or Downstream Oxygen sensor
    4 wire configuration
    Direct Plug-In Replacement.
    Built and tested to strict quality control standards
    NOTE:
    The compatibility list is reference only and every model has slight differences. Fir
    st,
    check whether your car is in this list. Then, compare your original O2 sensor with our product display pictures, specifically that it has the same pattern and shape of the connector end plastic casing. If you are not sure, please feel
    free to send a picture to us so we can confirm for you
    H
    OW TO ENSURE THAT YOU ARE BUYING THE CORRECT PART
    Enter complete
    Year
    ,
    Make
    ,
    Mode
    l
    ,
    Trim
    , and
    Engine Size
    in eBay Compatibility Chart Located just above the Item Specifics box at the top of the listing page.
    **
    PLEASE NOTE
    : Some applications are still dependent on other information.
    To reveal
    Important Part De
    tails
    in the Compatibility Chart be sure to put
    your mouse over the
    IMPORTANT PART DETAILS BOX
    *SOME SMART PHONES WILL NOT HAVE ACCESS TO THE COMPATIBILITY CHART*
    *It is the responsibility of the purchaser to verify complete fitment*
    Review Photo below for guidance.
    How to install an oxygen sensor?
    Must know before buying:
    1. If you have any problem, you can contact customer service online at any time. We will reply and try to solve the problem for you within 24 hours.
    2. If the purchase is wrong, please contact us first. We will return the product or help you find the right product for replacement according to the actual situation!
    (the price, quality and function of the oxygen sensor are fully included in our warranty and return policy. However, any labor costs, dealer store costs or damage caused by incorrect installation are not included.)
    How do I know the O2 sensor is good or not?
    A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or W
    aveform Simulation.
    Use a 10-mega ohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
    Goes above range between 0.1 and 0.9 volt
    Remains below 0.5 volts
    Stays fixed at a particular voltage
    You're free to choose replacement or refund if our sensor fails to work, in this case.
    Payment Policy
    Shipping Policy
    Returns Policy
    Contact Us
    Feedback
    Payment Policy
    We only
    accept PayPal. Credit card payment can also be made via PayPal.
    eBay Immediate Payment via PayPal. Please purchase and pay for the item through the eBay auction, and do not manually send us a PayPal payment.
    Shipping Policy
    We would send out within 2 business days usually .  If there is any delay, you will be notified immediately via e- mail .
    -
    Items will be shipped to buyer's eBay registered address.    Please confirm your address
    before making payment.
    -
    We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc.
    Returns Policy
    Our return policy is straightforward and customer friendly. You can shop with us. After all, we have been doing business for more than 10 years. Our policy is common sense in doing business. As long as it is within the limits of the manufacturer's warranty return policy (which we are obliged to comply with) and meet the following conditions, we will take back any goods within 30 days after purchase:
    The article must be in its original, unused state and must be returned in its original packaging.
    We cannot accept any items that have been installed and / or damaged. In addition, we do not accept returns that are not in the original packaging. These are restrictions set by product manufacturers and we are obliged to comply with their return policies. Items returned substandard or missing parts will not be credited.
    Return freight must be paid by the customer.
    Unless our company or listing error, the customer should be responsible for the return of freight.
    Contact Us
    O
    ur Working Time:(GMT+8)Monday to Friday,9:00-18:00.
    For inquires and customer support, please send your email via ebay email system.
    All emails will be responded to within 24 hours during business days.
    If You are not sure about what exactly, You need feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours, in that way You will get the right part and do not need to deal with returns - save your time!
    Parts Information: Before purchase this p
    arts, please check the compatibility information or call your local dealer to verify the correct OEM part number.
    Feedback
    1.We appreciate your business and strived to improve our customer service and our commitment to quality.
    2.We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do.
    3.If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, and we will be glad to work with you to have it resolved.
    Copyright © 2018 Dianxiaomi